Product Guide
Plastering 338

Plastering 338
MEGA GRIP’s Plastering 338 is a latex based bonding agent that is used for plaster work.
Purpose
MEGA GRIP has been specifically designed to improve adhesion to new, previously plastered or painted surfaces.
Cleaning Up
Clean tools and equipment with water before MEGA GRIP Plastering 338 mixture dries. Spillages should be cleaned off the surface of the floor immediately.
SURFACE PREPARATION
All surfaces to be prepared must be clean, free of loose material, dust, dirt, grime, grease, oil, or any other substance that would create a barrier to the adhesion.
COVERAGE
Coverage depends on the surface. 1lt does +-10square meters.
APPLICATION
- Remove all dust, dirt, grime etc. from the surface to be plastered.
- Dampen the prepared surface.
- Apply MEGA GRIP Plastering 338.
- Neat by brush or roller and allow to dry.
- Plaster in a normal manner.
A strong bond can be obtained by adding 20% MEGA GRIP plastering 338 per volume of water
within the plaster mix. For very frail, chalky and friable surfaces, a slurry coat is recommended by
mixing per volume the following:
1 part MEGA GRIP 338, 2 parts river sand with 1 part cement.
Always add dry mixture to liquid, and not visa versa. Apply to dry, within 24 hours plaster in the
normal manner making sure that the plaster does not exceed 25mm min in thickness.
A scratch coat may be applied upon off shutter concrete only 4-6 weeks after the shutters have
been removed. Due to the release agent within the concrete.
warning
DO NOT INGEST. If ingested, do NOT induce vomiting – Seek medical attention immediately.
If you require further detailed information please call our help line on: 079 241 8337
Manufactured by HCM South Africa
CEL: 011 900 4387
FAX: 086 505 4337
EMAIL: info@megagrip.co.za
WEB: www.megagrip.co.za